Pharmaceutical Applications

 

Mechanical Pump Seals

Many API or ANSI plans for mechanical pump seals require flow control and call out a flow control valve or a flow orifice. If flow varies with pressure fluctuations, fluid is either wasted or the system is starved which can overheat the seals and cause premature failure.

> Learn More


 

Heat Exchanger Systems

Heat exchangers are an efficient method of transferring heat from one matter to another. Heating or Cooling fluids are passed through a tubing coil, plate & frames, or radiators to maximize the surface area of the heating element in contact with the process media.

> Learn More


 
 

Nitrogen Membrane Systems

Membrane technology with nitrogen generators uses compressed air forced through a polymeric hollow fiber to selectively permeate oxygen, water vapor, and other impurities out of its side walls while allowing nitrogen to flow through its center and emerge as high purity N2 gas.

> Learn More


 

 

Picture1

Liquid Ring Vaccum Pump

A liquid Ring Vacuum Pump is a rotating piece of equipment comprised of a multi-bladed assembly located eccentrically inside a cylindrical housing. The assembly is driven by an outside source, usually an electric motor. Service water (or another liquid) enters the pump.

> Learn More


 

Filtration

Filtration

Characteristics of particle size and particle distribution is key to establishing the filtration system design to handle a variety of process conditions. Changes in fluid characteristics require process adjustments to maintain effectiveness. 

> Learn More


 

 

Minimum Pump Flow

Minimum Pump Flow

The pumps in these applications are high flow pumps that require a minimum constant flow to properly operate (also known as minimum continuous stable flow, or MCSF).

> Learn More


 

Sewage Plant

Polymer Injection Control

Polymers are used heavily in wastewater treatment applications to coagulate suspended solids and produce large curds, or flocculation. The solids can then be removed, leaving behind cleaner wastewater.

> Learn More


 

Blending and Batching Systems

Kates accuracy of setpoint and quick response to process pressure changes makes it an ideal cost-effective design for batching and blending applications

> Learn More


Kates Diagram